Konica Minolta bizhub C350, C351 & C450 Waste Toner Bottle Instructions

Turn the printer off and unplug the power cord.

If a finishing option is installed, remove it from the main unit before trying to replace the waste toner bottle.

When removing the finishing option, support the horizontal transport unit with your hand to prevent it from dropping.

Open the Left door.

Grasp the handle, and remove the waste toner bottle. Note: Raise the waste toner bottle gently before removing it.

If scattered toner has accumulated in the vicinity of the toner collecting port, do not tilt the waste toner bottle when removing it.

Do not leave the waste toner bottle in a tilted condition after removing it.

Remove the Cover of Waste Toner Bottle, and set it on the Collecting port.

Clean the surface around the waste toner collecting port.

1. Wipe the areas around the Waste
Toner Collecting Port clean of spilled toner and dirt using a soft cloth dampened with water or alcohol.

Remove the waste toner bottle from its box, and remove the packing material.

Grasp the handle, and set the waste toner bottle in place.

Close the Left Door.