HP Color LaserJet 5500 Fuser Kit Instructions

Manufacturer Part #: [C9735A], [RG5-6848-000]

Contents

1. Disassembly
2. Reassembly

Disassembly

1. Using the side handles, open the top cover.

   WARNING: The fuser might be hot. Wait 10 minutes before proceeding.

   

    
2. Completely loosen the blue thumb screws on either side of the fuser.

   

    
3. Grasp the ends and pull straight up to remove the fuser.

   Caution: Grasp the fuser by both ends, or the printer may be damaged.

   

    

Reassembly

1. Remove the new fuser from the bag. Place the used fuser in the bag for recycling.

   

    
2. Grasp the sides of the fuser and lower it into the printer. Press firmly to seat it in position.

   

    
3. Tighten the blue thumb screws.

   

    
4. Close the top cover. After a short while, the control panel should display "NEW FUSER KIT=".

   

    
5. On the control panel, press (Down button) to highlight YES , and then press (Select) to reset the fuser count.