Originally written for: HP LaserJet 4000
Also applies to: HP LaserJet 4000n, 4000se, 4000t, 4000tn, 4050, 4050n, 4050se, 4050t, 4050tn
These instructions explain removing tray 1 of an HP Laserjet 4000 and similar models.
Removing Tray 1 From the Front Cover
Step 1. Open Tray 1.
Step 2. Push outward on the two slot hinges to release the pins on Tray 1.
Step 3. Slide the Front Cover to the right and remove it from the three hinges on the bottom.
Removing the Tray 1 Sensor Arm Cover
Step 4. Firmly pull both sides of the Tray 1 Sensor Arm Cover toward you until it releases from the shaft. See Figure 6-13, “Detail of the Tray 1 Sensor Arm Cover,” on page 6-17.
Step 5. Rotate Tray 1 downward and remove it from the two hinges.
Detail of the Tray 1 Sensor Arm Cover
Note: When you reinstall the Tray 1 Sensor Arm Cover be sure the Sensor Arms move freely.
- Publisher: Precision Roller